ETL LASER WELDING MACHINE- M200Y
Product Name:Laser Welding Machine
Machine
Model:ETL-M200Y
Applicable Material:Ti,stainless steel,A3 steel,Al,red copper.
Main Future:with integrated design,Compact structure and beautiful
looking,Have good beam pattern、energy
stabilization、stable performance,reliable、Welding
speed is fast、Welding range、consumption with long life span.
Applicable Industiral: widely used in electronic parts、IC、electrical
engineering and electric apparatus、mobile、hardware product、tools accessories、exactitude instruments 、glass and watch、car accessories、medical
apparatus and instruments etc.
Main Parameters
Laser
1. Laser
length:
1.06μm
2. Laser
type:
Nd:YAG
3. Output
energy:
100J
4. Average
output power:
250W
5. Max
Average output power: 350W
6.Laser pulse frequency:
0.1-100Hz(continuously adjustable)
7.Laser pulse width:
0.3-20ms(continuously adjustable)
8. Beam-divergence
angle:
≤8mrad
9.Laser continuous working time: ≥16h
Laser power supply
Adopt new laser power supply(Single
lamp pumped),which is constituted by the main circuit、trigger
circuit、pre-burning
circuit、control circuit、Protection
circuit.
The frequency、pulse
width、electric current are adjustable,with overcurrent、under
voltage defensive function.
1.input
power: AC220V10%/50Hz/30A
2.Rated
power input:
8KW
3.Pulsed current:
100-400A
4.Unstability
of power supply:
≤±2.5%
5.with overcurrent、under
voltage defensive function.
6. With the function of displaying the working times, working time.
Laser transmission system and the focus systerm
1. Focus lens focal length:
f=75mm
2. minimum
spot diameter:
0.3mm
Semiconductor laser Indicator light source system
1.indicating system is red visual light
2.Indicator
light wavelength:
0.6328um
3.Indicator
light power: 1mW
Cooling system
Inner loop cooling system contains water
tank, heat exchanger, filter, multi-stage stainless steel magnetic pump and
water temperature, water protection and related parts。
Pressure of supply water:40Kpa
Water current:≥30L/Min
Water temperature adjusting range:20℃-45℃,±1℃。
Work table
Adopt two dimension work table,X×Y=300mm×300mm,position accuracy is 0.02mm,reposion
accuracy is 0.01mm。
Z=0-150mm。
revolving table, stepping motor drive.
Coaxial monitoring system
With CCD camera, video capture card, Coaxial observation position of solder joint.
magnification times: 20 times